Reviews

Denafrips Terminator DAC Review

Intro

There have been rumors that the China-based Denafrips Terminator is the Genghis Khan of DACs – conquering all other DACs placed before its path. At first blush, this R-2R behemoth is making a statement just on sheer mass.

As far as origins go, Denafrip’s lead designer is Mr. Zhao. His goal was to build a DAC that will compete with others many times its price ($4,299). His core strategy? He believes the original R-2R architecture is still the most appropriate technology for DACs. And thus for the reproduction of digital music. This resulted in their flagship DAC – the Denafrips Terminator.

DENAFRIPS = Dynamic. Exquisite. Natural. Attractive. Fidelity. Refined. Intoxicating. Pure. Sophisticated.

“The Terminator will be our True Reference Master Class DAC for the next 10 years.”


First Listen

I first heard Denafrip’s line of DACs at AXPONA 2018. Gingko Audio had their entire line of DACs for blind testing. During my session, I (and a few others) actually preferred their entry-level DACs (Ares and Pontus) for their tonal character. But couldn’t deny how resolute and quiet the Terminator sounded. I had to take a closer look.

Although all the other DACs are named after Greek gods, the Terminator is an indestructible cyborg. It turns out the movies themselves were heavily influenced by Greek mythology.

Anyway, Alvin Chee of Vinshine Audio (Singapore) is in charge of Denafrip’s global distribution. Denafrip’s US distributor is Mike Powell of Verastarr.

And so, I shot Mike an email and he was kind enough to test and break in the review unit before sending it off. A few days later, a massive box arrived at Audio Bacon’s porch.

I was fortunate enough to spend a few months with the venerable Denafrips Terminator. As usual, in order to thoroughly evaluate this DAC, I’ve tried a few setups with different preamps, amplifiers, cables, and even speakers. Sources were a mixture of local DSD, Redbook, and Spotify, Qobuz, and Tidal streams.

Build & Features

Build

  • Proprietary R-2R and DSD architecture
    • Dual FPGAs handle resistor switching logic.
    • True balanced 26-bit R-2R (PCM) with 6-bit DSD (32-step FIR filters)
    • Each channel with more than 500 pieces of 0.005% high precision, 10 ppm low thermal effect precision resistors. Quadruple the amount of most competitors.
  • Encapsulated ultra-low noise, multi-stage linear power supplies
    • A 250VA and 60VA toroidal o-core transformer for analog and digital sections respectively.
    • Box within a box: Thick metal alloy enclosure with additional steel divider for additional shielding.
    • Ultra-low ESR reservoir capacitors
    • WALK Jung Super regulators
  • Amanero Combo384 USB interface
  • Ultra low jitter AK4118 digital receiver
    • The lowest clock jitter digital receiver in the market today.
  • CRYSTEK Flagship CCHD-957 Femto Clocks
    • First In First Out (FIFO) using high-speed RAM
  • Thick metal alloy enclosure (solid aluminum plates)
  • Weight: 42 lbs – The last time I carried a DAC this heavy was probably the Berkeley Audio Alpha DAC Reference.
  • Tiny red, inconspicuous LEDs
  • Comes in silver or black.
  • 3 Year Warranty

Features

  • Up to native DSD256 (USB and I2S inputs only)
  • PCM 384 kHz / 24-bit (USB and I2S)
  • Up to PCM 192 kHz / 24-bits on the remaining inputs.
  • Upsampling mode to PCM 384 kHz and DSD 256
  • Mute and Phase buttons (red LEDs on the left will flash sequentially)
  • Mode button allows for configurable HDMI I2S pin-outs for source compatibility (there isn’t an industry standard for I2S).

Digital Inputs

  • 2 x Coaxial: RCA and BNC (75 ohms)
  • 1 x TOSLink
  • 1 x SUB
  • 2 x AES/EBU
  • 3 x I2S: HDMI (LVDS), RJ45 (LVDS), RJ45 (VLCMOS)

Analog Outputs

  • RCA – 2.3 Vrms, 625 ohms
  • Fully Balanced XLR – 4.6 Vrms, 1,250 ohms

Equipment

Using two ferrite chokes on my Danacable TruStream USB cables…

Page: 1 2 3 4 5 6

Jay Luong

Mr. Audio Bacon himself. An open-minded electrical engineer and software developer by trade. I have an obsession with the enjoyment of all things media - specifically in the realm of music and film. So much heart and soul (and money) go into the creation of this artistry. My aim is to find out which products get me closer to what the musicians and directors intended.

View Comments

  • I'm not even in the market for another DAC but your review just kept me reading. Much like you describe the delicate line toed by the Denafrips between detail and fullness, your use of engaging language whilst still conveying the technicalities is a rare combination. This is the gold standard for reviews.

    • Thank you for your kind words! Describing sound is difficult - but I find if you write as you listen (not after the clip ends), it's more authentic and easier to articulate.

  • Great review Jay. Thanks! I've got a couple of questions. In your comparisons with the Chord Dave (or TT), it wasn't clear to me always when the M Scaler was used or not. I've found the M Scaler to make a big difference for me. Do you use the full (2 SPDIF cable, 7xxKHz upscale) 1M taps mode or just one cable at less than full upscale capacity when used with the Chord Dave? I note that the Denafrips cannot handle a 7xxKHz input signal at all. I ask this as I find a big difference with my setup (Chord Dave, M Scaler, PS Audio Perfect Wave power center and AC12 power cord, Focal Utopias with special silver cable from Norne audio) with and without full M Scaler use. In any case this Denafrips sounds like a great DAC I may want for other systems I have. On another related note, here's a belated thanks to you for your Boomslang (and other SPDIF cables) review (I did more testing of the Boomslangs for Jonny and also could not get them to work in my Dave/MScaler system either regardless what I tried - lots of things). But I ended up with some Black Cat Tron SPDIF BNC cables (best I've ever heard yet). Wow! If you can get those for review you might enjoy the experience. The folks at the Cable Co don't have those to lend because no one ever returns them once they hear them!

    As an upscaling aside, here's a great and not very commonly seen article on how almost no product (except Chord, although they're of course biased) is likely doing realtime upscaling correctly - as per Shannon's sampling theory https://chordelectronics.co.uk/wp-content/uploads/2018/07/The-theory-behind-M-Scaler-technology.pdf. Chord is doing it right (to 16 bit resolution) with the M Scaler - So it's not surprising that NOS sounds in many ways better on many DACs.

    So again, many thanks for all you do - I really appreciate the information and style of your reviews!

    • To be fair, I was using a straight USB input for all DACs (from the Innuos server). I only used the M Scaler to test optical and coaxial performance (USB was SO much better with the Denafrips). I've written quite a few notes about the M Scaler in the process (for an upcoming review) - one being that even in passthrough mode, the M Scaler made all the Chord DACs sound significantly better (tonality, resolution, body, everything). It also seems like the "blue" mode strikes a tonal balance that works for me (less than a million taps). The HMS changes the game.

      I did have a few hiccups with the Boomslangs in dual BNC mode but I did this weird thing where I plugged one into the S/PDIF first, played some music and changed some M scaler modes, then swapped it into the BNC #2, and haven't had hiccups since. Unfortunately, I don't know what the exact steps were. I've unplugged and replugged them and they seem to be working fine - zero dropouts for months. Really odd. I'll have to give the Black Cat Tron a listen. I actually requested a cable for the review but they said they weren't interested at the time. I would highly recommend a listen to the WAVE High Fidelity STREAM cables if you get the chance.

      FWIW, the OS mode on the Terminator is better than having Roon do it - but that's not much of a surprise I guess. You're paying for the hardware.

      • The M Scaler is indeed a beast! I've found the same - that even in bypass mode (no upsampling) but with dual SPDIF to the Dave, things sound better than straight into the Dave via USB. Interesting about the Boomslangs. I tried lots of dual cable connections (the only way I want to use it) and could never get anything to work beyond ~192KHz rate. As to other SPDIF cables, they do seem to make quite a difference!

    • Thanks Jay for this nice review. I understand there is an upgrade coming this year for the DSD module...

      It would have ben interesting to compare a) USB input with the Amanero module inside versus b) using a good quality DDC like singxer SU1 or SU6 (that one has same clocks than terminator) AND the I2S HDMI connection (advantage: separation of data and clock signals + no extra conversion needed). Aren't you curious?

      One question: if you use an appropriate power cord like the furutech one you have + black magic USB cable on terminator, how does it compare then with the more tonaly satisfyings DACs you tested? Can you get the best of both worlds?

  • A friend owns the Chord Blu Mk2 and Terminator. And we have compared the various upsampling modes from Blu Mk2 (it has a switch at the back to select upsampling levels) into the Terminator playing CDs. Speakers are Vivid Kaya 45, amp is Esoteric F-03A (class A 30 watts)

    Each time we switched to a higher level, the spatial cues, and accuracy of the sound/tone goes up, and instruments and imaging becomes more “real” & holographic and better tone. The difference between ‘medium’ and ‘high’ upsampling is surprising significant.

    Blu Mk2 in “Upsampling High” mode into Terminator NOS mode (through BNC cable) is a force to be reckoned with. You kinda get the best of both worlds from Chord and Terminator.

    I was rather surprised you didn't find the M-Scaler with Terminator NOS to be a great combo.

    • I completely agree with you - your impressions are spot on. I think NOS with M Scaler is a great combo - and many will prefer the M Scaler at its maximum upsampling mode. That thing just works miracles. However, in my setup, I believe that coaxial input robs some of the intrinsic soul of the recording (I listen to mostly vocals). It comes off a little anemic, even in passthrough mode. At that point, the M Scaler does its job, but that warmth is forever gone. My ears tell me that the coaxial input is holding it back. It has been a while so I'll give it another listen and update if needed. Thank you for your comments.

  • "Unfortunately, I could not test the I2S input"
    IMO this is very unfortunate and impacts veracity of the review in total since it is said that I2S is the preferred input on this DAC. Would add much value if you can compare it to the rest of your findings.

    • Due to heavy interest, Mike's sending me an I2S adapter. I'll update the review with my findings.

  • Thanks for the detailed review. I am toying with upgrading my current DAC. My question is this: How did the Denafrips rate comparatively with regard to timbrel accuracy? Or to put it another way: If you played a solo cello - which dac sounds closest to a real cello? (Actually any acoustic instrument but strings have the most complex waveform and are the hardest to recreate. )
    Thanks again for the thoughtful review Jay.

    • Great question. Accurate timbre involves a few traits - including resolution, tone, timing, weight, etc. The Denafrips excels in the resolution portion, and perhaps timing. But the rest of the DACs here do better with color and weight. Tuning with power cords and USB cables does help the Terminator's case a bit. The Chord Electronics TT 2 and DAVE have enough of these traits to be the most accurate I've heard so far - especially with a Hugo M Scaler. Digital has never more real.

  • That's really insightful. Thanks for detailing the character of DT and comparing with other DACs is really helpful. This review came in right time as I am undecided between Denafrips vs Hugo TT2. I do not have chance to audition Denafrips, but I will get chance to review TT2 soon. I did consider Mytek Brooklyn DAC+ as it really great DAC which one of my friend has. It's very musical, dynamic, mids are thick and has muscle. Later I heard about Denafrips, since I couldn't get chance to audition this, I am now waiting to audition TT2. From review it looks like Denafrips has sound stage, dynamic and immersive sound. I give preference to musicality over clarity or naturalness. Hence, it would be great help if you can share your thoughts on musicality. Which one is more musical of both. Thanks, Soma

    • Thanks Jay for this nice review. I understand there is an upgrade coming this year for the DSD module…

      It would have ben interesting to compare a) USB input with the Amanero module inside versus b) using a good quality DDC like singxer SU1 or SU6 (that one has same clocks than terminator) AND the I2S HDMI connection (advantage: separation of data and clock signals + no extra conversion needed). Aren’t you curious?

      One question: if you use an appropriate power cord like the furutech one you have + black magic USB cable on terminator, how does it compare then with the more tonaly satisfyings DACs you tested? Can you get the best of both worlds?

      • Mike will be sending me a USB to I2S converter this week. I'll update the review with my findings.

        These power cords and USB cables, IMO, give it a better tonal balance but trades resolution, stereo imaging, focus, and spatial clarity. This is an expected tradeoff and some will be completely happy with that. Many are just fine with the Terminator sound out of the box. The only way to know is to hear it for yourself (many of these cable companies offer 30 day trials).

        The beauty of the Denafrips Terminator is its ability to provide incredible insight into a recording with "lifelike resolution."

        • The Iconoclast OFE speaker cables bring the Terminator closer in tone to the other DACs. Still less warm but, to my ears, more natural sounding. It does exchange focus and air though.

  • Hey Jay, mind telling us the difference between the Dave & the PS Directstream?

    In your comparison, you made it clear the Dave & the DS were more tonally warmer tonally than the Terminator, but how do they compare against each other in those aspects?

    Your review made it seem like they share a similar sound signature, but the Dave is nearly 3 times the price.

    • The DAVE has much more resolution, more lifelike articulation, super analog, quieter, and has more accurate timbre. The DAVE's biggest advantage is timing. You're able to hear reflective and ambient cues more naturally - and transients have a tangibility to them. In short, it just sounds more real. To my ears, it's the perfect "digital foundation" to build a digital playback system on. But yeah, it's much pricier.

      That said, the DSD is definitely warmer and denser sounding than the DAVE. A very musical sounding DAC regardless.

      • Great review which helped me in my decision to order the 2020 version Terminator, thank you. I have to say my experience of the service provided by Alvin at Vinshine has been exceptional, I wonder if he ever sleeps.
        I’m really interested to compare the Terminator against my current Yggdrasil A2. What puzzles me is, I had a home loan of the DAVE, which was clearly better than the Bluesound Vault 2 integral DAC, but I could not discern any difference whatsoever between DAVE and the integral DAC in my Mcintosh C2500 pre. I even spoke with Chord, who were very helpful, to ensure I’d got it set up correctly, to no avail. The Yggdrasil however was the straw that broke my vinyl systems back and sent me fully digital. Present day, with Auralic Aries G2, Mutec, another company with excellent service, MC3 + and REF10, Levinson 523 pre & 33H/Audio Music AM833S amps, with Focal Maestro Utopia/Quad 2905 speakers, I’m hoping the 2020 vision Terminator can really shine and maybe get another loan of DAVE and see if my view of it has changed.

  • Great Review Jay. As a current happy owner of Terminator I concur with your findings. When listening to it I find myself much more apprecating dynamics and information of music (thus the movement and action of musicians ) rather than the timbre of different instruments. It's also a musical dac but musical in an very differnet way compared to a Dave or a DCS. I suspect the tonality issue ( a little bit rounded in midrange and not as differentiating as other great dacs) is due to its isolation foot and unique output stage (not tube, not opamp), but who can tell:) It's still a great value

    • Thank you for your kind words. I think you've pointed out the trade-offs quite accurately - and it's aligned to what I hear. In any case, definitely great bang for your buck.

  • Hi Jay, please try to get the new terminator DSP then re-evaluate. I just recieved mine. Its a major change for the better!

Recent Posts

Treehaus Audiolab Brings “The A/Machines” New 300B Amplifier

Treehaus often avoids calling product “The Best.” The world of audio is far too… Read More

6 days ago

Meze Audio Liric 2nd Generation Headphones

Next-generation headphone developed with community  feedback to deliver an even better listen and stunning… Read More

3 weeks ago

TIDAL Audio Welcomes Audio Ultra to Its Dealer Network

TIDAL Audio, the world renowned manufacturer of luxury high-end audio speakers and electronics, is delighted… Read More

4 weeks ago

Treehaus Audiolab introduces new “Texture Black Metallic” finish

Treehaus Audiolab introduces new “Texture Black Metallic” finish at the Florida  International Audio Expo 2024… Read More

2 months ago

Review: PGGB – Your Personal Music Upscaler

As an audiophile constantly in pursuit of the pinnacle of sound quality, I've had the… Read More

2 months ago

HIFIMAN Debuts Two New Desktop DAC/Amps

HIFIMAN Debuts Two New Desktop DAC/Amps EF500 and EF499 Put HIFIMAN Design and Performance Within… Read More

2 months ago

This website uses cookies.